1
Share:
The Cement Flow Table according to EN standard. Used for determining the consistency of mortar, lime and cement specimens. Also manual and motorized models are available. The hand operated model is fitted with a hand wheel. The motor operated model is driven by a motor speed reducer through a mechanical coupling at the rate of 1 revolution per second. The number of drops is preset on a counter and the machine stops automatically at the end of the cycle. EN model, the table is manufactured from steel, stainless steel or brass and has a 300 mm diameter table. The conical mould is made of brass or steel and has dimensions of 100 mm base dia. x 70 mm top dia. x 60 mm height.
Technical Parameter: Total Weight of pulsatory Part: 4.35Kg±0.15Kg Drop height: 10mm±0.2mm Diameter of table: 300mm±1mm Flow mould: 70mm and 100mm diameter X 60mm deep. Tamper: 20mm diameter, 200mm long
Technical Parameter: Total Weight of pulsatory Part: 4.35Kg±0.15Kg Drop height: 10mm±0.2mm Diameter of table: 300mm±1mm Flow mould: 70mm and 100mm diameter X 60mm deep. Tamper: 20mm diameter, 200mm long
Inquiry - CEMENT MORTAR MANUAL FLOW TABLE
